 | add a note |
Save
printrbot v2lc with enclosure 300 obo need gone asap
I have a printrbot v2 lc single extruder 3d printer for sale. It has had some upgrades added to it and comes in a 19u server cabinet with air filtration system and lights. Prints 8X8X8, has hot bed but use a printinz plate instead for better adhesion with pla. Will print in pla and abs. Set to print in 1.75mm filament. Has a direct extruder but still have wades extruder. Has the new rev f6 printrboard specs below.
This device was $499 on kickstarter unassembled without the upgrades.
This printer in not turn key it needs to be callibrated and tinkered with and i just dont have the time.
Im selling this printer because it takes up a bit of room in my small apartment and i dont have the time to work with it anymore. I have put a lot of time into this over the past year and im sad to let it go
I will be posting pics later tonight
Description
The Rev F6 Printrboard with MicroUSB connector features a push-push microSD card socket for increased ease of use for printing via SD card. We have also added an additional fan ports for independent control of cooling your hot end and the print.
The Rev F6 Printrboard with MicroUSB Connector is compatible with all current Printrbot models.
All Rev F boards are identical in terms of components, but you can select a board that is preloaded with the correct firmware and setting values for your Printrbot. *Maker Kit users, select "Play 1505".
Technical Specifications:
Rev F6
MicroUSB connector
Push-push microSD card socket
Independent fan ports -- Control your print fan and hot end fan separately.
6-pin power connector (6 Pin Power Harness NOT included. Order separately here)
Digital potentiometers
Screw terminal for heated bed connection
Does not ship with EXP1, EXP2, I2C, or ICSP pins, previously on the F5.
Compatibility:
DUAL EXTRUDER NOT COMPATIBLE -- 1504/1412 Plus Dual Extruder users. You will have to use Rev F5 or earlier.
1505 Play Users w Ubis 13 Hot End -- Click here for wiring instructions.
1405 Maker's Kit Users -- Select the "Play 1505" option.
LCD Users: Both v1 and v2 LCD screens are compatible, but you will need to solder your own pins -- click here for pins
v2 LCD users, you will have to forgo the SD adapter ribbon cable. However, microSD card use is still an option. See gallery for photos.
The Rev F Printrboard can be used with models with and without an Auto Leveling Probe. Click here for instructions for connecting a Z end stop and full wiring diagrams.
Requirements:
Installation Required: YES -- Click here for wiring diagrams.
6 pin male dongle, or 6 pin male ATX connector from an ATX power supply
Firmware:
Your Rev F Printrboard will come pre-flashed with the firmware that you have selected. Click here for more instructions on re-flashing.
Other mods include power supply box for both printer and enclosure(lights and fans)
Control panel
Modified xbox 360 connect for 3d scanning
Roll of pla
[3D CAM] LCD Smart Controller for RepRap 3D Printer RAMPS 1.4 Electronics (20 characters x 4 lines)
Extra nema 17 motors
A few odds and ends
If you want i have a stand i put it on free
need gone by may 28th. first reasonable offer takes it
If you have any questions or price in mind let me know
This device was $499 on kickstarter unassembled without the upgrades.
This printer in not turn key it needs to be callibrated and tinkered with and i just dont have the time.
Im selling this printer because it takes up a bit of room in my small apartment and i dont have the time to work with it anymore. I have put a lot of time into this over the past year and im sad to let it go
I will be posting pics later tonight
Description
The Rev F6 Printrboard with MicroUSB connector features a push-push microSD card socket for increased ease of use for printing via SD card. We have also added an additional fan ports for independent control of cooling your hot end and the print.
The Rev F6 Printrboard with MicroUSB Connector is compatible with all current Printrbot models.
All Rev F boards are identical in terms of components, but you can select a board that is preloaded with the correct firmware and setting values for your Printrbot. *Maker Kit users, select "Play 1505".
Technical Specifications:
Rev F6
MicroUSB connector
Push-push microSD card socket
Independent fan ports -- Control your print fan and hot end fan separately.
6-pin power connector (6 Pin Power Harness NOT included. Order separately here)
Digital potentiometers
Screw terminal for heated bed connection
Does not ship with EXP1, EXP2, I2C, or ICSP pins, previously on the F5.
Compatibility:
DUAL EXTRUDER NOT COMPATIBLE -- 1504/1412 Plus Dual Extruder users. You will have to use Rev F5 or earlier.
1505 Play Users w Ubis 13 Hot End -- Click here for wiring instructions.
1405 Maker's Kit Users -- Select the "Play 1505" option.
LCD Users: Both v1 and v2 LCD screens are compatible, but you will need to solder your own pins -- click here for pins
v2 LCD users, you will have to forgo the SD adapter ribbon cable. However, microSD card use is still an option. See gallery for photos.
The Rev F Printrboard can be used with models with and without an Auto Leveling Probe. Click here for instructions for connecting a Z end stop and full wiring diagrams.
Requirements:
Installation Required: YES -- Click here for wiring diagrams.
6 pin male dongle, or 6 pin male ATX connector from an ATX power supply
Firmware:
Your Rev F Printrboard will come pre-flashed with the firmware that you have selected. Click here for more instructions on re-flashing.
Other mods include power supply box for both printer and enclosure(lights and fans)
Control panel
Modified xbox 360 connect for 3d scanning
Roll of pla
[3D CAM] LCD Smart Controller for RepRap 3D Printer RAMPS 1.4 Electronics (20 characters x 4 lines)
Extra nema 17 motors
A few odds and ends
If you want i have a stand i put it on free
need gone by may 28th. first reasonable offer takes it
If you have any questions or price in mind let me know
|
Saint Petersburg, FL |
Poster's other listings
